Kyoritsu 8113 Manuel d'utilisateur

INSTRUCTION MANUALMODEL 8113KEW SNAPSERIESKYORITSU ELECTRICAL INSTRUMENTS WORKS, LTD., TOKYO, JAPANAC/DC CLAMP ADAPTOR

―8――8―(2) Refer to Table 1 for output voltage against input. Set themultimeter to the appropriate range. When using a digitalmultimeter(3-1/2 digit),

―9――9―(5) In case of DC current measurement, output is positive whenthe current flows from the upside to the underside of theclamp adaptor as shown in

―10―When the battery indicator LED blinks at a longer interval andfinally stops blinking , replace the battery as indicated below.CAUTION : Do not rep

―11―7-1 Model 8021 KEW ENERGIZERModel 8021 ENERGIZER permits Model 8113 to make ACcurrent and voltage measurements of household electricalappliances w

―12―7-2 Model 8008 MULTI-TRANModel 8008 MULTI-TRAN is designed to measure AC currenthigher than 200A or large bus-bars ( up to 150×100mm) andconducto

Kyoritsu reserves the right to change specifications or designsdescribed in this manual without notice and without obligations.

DISTRIBUTORPrinted in Japan92―1152A

Page1. Features... 12. Specifications...

● Model 8113 is a clamp-on AC/DC current/voltage converterthat permits AC/DC current measurements from 1mA to200A in conjunction with a voltmeter havi

―2―2. SpecificationsAccuracy:Output Voltage:（Above accuracies are specified for ＋ 18℃ to ＋ 23℃ at ＜ 80%relative humidity)OperatingTemperature& Hum

―3―Low BatteryWarning : Power indication lamp flashes at a longerinterval when batteries become exhaustedand finally stops flashing at approx. 2.2V.Cu

―4―This instruction manual contains warnings and safety rules thatmust be observed by the user to ensure safe operation of theinstrument and reta

―5―might be at ground potential. Keep your body isolated fromground by using dry clothing, rubber shoes, rubber mats, orany approved insulating materi

―6―4. Instrument Layout1 Transformer JawsPick up current flowing through the conductor.2 Jaw TriggerOperates the transformer jaws. Press to open the

―7――7―BEFORE USING THE ADAPTOR, READ THE SAFETYNOTES CAREFULLY AND THOROUGHLY.5-1. Preparation(1) Remove the battery compartment cover and install the